Well, I finally got my okief hd tumbler. It was in a plan old brown box and well packaged.
The tumbler was easy to put together. The motor was not attached to prevent damage.

This thing is so cool! If you don't have one, you'll love it! beats using a sieving box.


My first tumble, some timewarp from amrad, some strawberry diesel from pablofunk, and my romulan x ubc chemo from federation. It smells so good together!


First pass 15min.


Second pass 45min.

First pass minus a bowl.

First and second pass combined.

sweet little unit.do you know what size the mesh on your drum is?once i collect the trich.,i prefer to cure for 1-2 months minus the samples along the way.plumbers putty is a good repair should you have an accident with stems or stalks.
wohlandr

What do those things run Tategoi?

110 steel mesh. I pull most of the woody stalks and branches out first. I'll cure these. Got to buy a steel press. I'm gonna buy a Makin's Clay extruder Steel version. I read the steel version is better than the aluminum to heat and press. A dime fits perfectly to plug the hole.

okief.com

Did another tumble with the same herb.
The last run is on the left.

Is that just a piece of steel cut for the bottom of the tote? This doesn't look toooo hard to make...

The kief with coin is on a plastic sheet. The drum is made of wood, steel screen, and steel rods. If anyone wants I can take better pics of the drum and motor attaching point. The motor turns slow.

Please do, I've got access to all sorts of motors and stuff. Only thing I think I'd have to order to make one of these is the screen.
It'd be cool to plas out a piece of stainless for the bottom / collection area

The screen attaches to a verticle wooden beam. Two rubber bouncing balls are included to help with the sieving.

The steel beams are actually long screws.